CUBASE 8 PRO TUTORIAL DRIVERS
CUBASE 8 PRO TUTORIAL DRIVER
CUBASE 8 PRO TUTORIAL MANUAL

The MOX Editor would punish you by scrambling other settings and you would keep going back and forth resetting things. If you do, you are doubling or duplicating the routing. Don’t assign any ports there to anything eg the MOXF8. While using/setting up the MOX6/MOXF8 with the MOX Editor, leave the external instruments panel on the audio connections settings alone. If it doesn’t light and indicate, you would struggle to export to audio. That green light shows audio is routed through it. Play back and you would see the tiny spot on the MOXF8 rack on the right panel glistening while you playback. You may record, play back but if you don’t set these two as above, you wont be able to export your midi to audio. Select inputs to ALL MIDI INPUTS and then select output to MOX6/MOXF8 MIDI IN (This is the key to a whole lot. Select the track it loads and go to project inspector. It will create/load onto your project window. From the instrument rack select MOX/MOXF 8. This one is critical if you are to get audio from the Midi recordings. Leave the two bottom parts unchecked/unassigned. The top two routing should show Ports 3 and 4 respectively.

Go to VSTi Settings panel and check the routing.

If you have already messed around with these parameters, please go to page 7 of the MOX Editor Manua. They are done automatically by remote tools. When you uncheck the USB dialog box, it will grey out. Click on the Set up and check the panel for settings. Once it’s done, the status would show ONLINE. Allow it to synchronize with your Yamaha MOX instrument. Create Stereo inputs and assign ports 1 and 2, then flip to outputs and create stereo outputs and assign it to 1 and 2.

Click on Audio Connections/Device Manager (depending on what version of Cubase you use).

CUBASE 8 PRO TUTORIAL DRIVER

In your Midi Ports tick the driver you use eg. In Cubase go to studio-set up, select your audio interface as the main driver, make sure port 1 and 2 are checked. However, if you want to use another audio interface (I use Focusrite) then select that driver. Now concerning your audio driver and soundcard (if you want to use the MOXF as your soundcard, then you can select Steinberg USB ASIO Driver as your audio interface in the studio set up menu.Set parameters like Local control to off from the utility function, also set function to USB (pressing Quick set up will do all the settings for you and the remote tools you installed will also do the settings at the Cubase/DAW end.

CUBASE 8 PRO TUTORIAL DRIVERS

Connect the USB cable to your computer and your mox after downloading and installing the drivers and the editor.Things to get handy: A USB to Midi cable, download the Steinberg USB Driver (you may not use this ultimately but i will explain later), download moxf editor, and the remote tools too.Someone needs to decongest and translate this process through very simple steps and that’s what am doing below: FIRST METHOD OF CONNECTING THE MOXF TO YOUR DAW

CUBASE 8 PRO TUTORIAL MANUAL

The Moxf8 editor manual, and the user manual appear to be very complex for the amateur in some way. Another guy who posted on this forum has had it for 4 years and never got it to work with Cubase. I’ve owned the MOXF8 since October, 2017 (I bought it in Sheffield, UK while visiting), but never got it to work with cubase.

I decided to post this because from my drilling through the topics here, I’m of the opinion this is a serious issue with most users of the Moxf8.

Cubase 8 pro tutorial